1300 557 356 
Fuel management for tank farms
The tank
The biggest fuel bill on site. The thinnest record behind it.
A tank farm is measured at delivery and at the invoice, and everything in between is a spreadsheet. Fuellox treats each dispense point as its own controlled outlet. HD mounts on a pedestal at the point, and where there's a containerised pump bay or a large electrical panel, Facia gives the same control as a flush, minimal install. Every outlet reports into the same account.
- A unit per dispense point, all in one account
- HD on a pedestal or Facia in the panel
- Level sensing across every tank
-
Bulk tank farm
50,000 litres and above
Multiple bulk tanks with shared or separate dispense points, usually on a depot or a major project.
-
Fuellox HD The same controller in a weather-proof heavy-duty enclosure for exposed sites. SKU: FLX-V2-HD -
Flomec 40mm BSP pulse meter The meter for a high flow delivery line. SKU: FLOMEC-OM040A001-211 -
Enterprise service Multi site, multi client and subcontractor reporting. SKU: FLX-LG-ENT -
50 pack QR stickers One tag per machine, so every fill lands on the right asset. SKU: QRLD-050
-
-
Containerised pump bay
Any
A pump bay serving one or more bulk tanks, with mains power and a panel.
-
Fuellox Facia The fixed install for a standard tank. SKU: FLX-V2-FACIA - Flomec 40mm BSP pulse meter The meter for a high flow delivery line. SKU: FLOMEC-OM040A001-211
- Enterprise service Multi site, multi client and subcontractor reporting. SKU: FLX-LG-ENT
- 50 pack QR stickers One tag per machine, so every fill lands on the right asset. SKU: QRLD-050
-
Mixed tanks, mixed hardware
Each outlet on its own meter. One record across the site.
The bulk tanks and the pump bay report as one. If the depot also fills service trucks or trailers, they go on the same system, so every litre that leaves the tank farm ends up in one record.
- The unit
Add an outlet, add a unit
When a new dispense point goes in, it gets the unit that suits it, HD on a pedestal or Facia in a panel, and joins the same account.
- The system
Each dispense point, by name
Name each unit after its dispense point, and the dashboard shows which outlet every litre came from, next to the tanks on your other sites.
- The meter
40mm for bulk flow
The high-flow lines on a tank farm take a 40mm Flomec, and a Veeder Root where there's a tanker in the mix. The meter changes with the line. What it feeds doesn't.
- The plan
Enterprise, for a bulk operation
Enterprise is what we list: it adds a running virtual tank balance and reporting across sites and clients. The plan still follows how many tanks and sites you run, and who needs the numbers.
Your setup might look nothing like this.
Tell us what you run, and in 30 minutes we'll work out the setup that suits each tank. If that's less than the list above, we'll say so.
